[OOR-Users] configuring OOR on ubuntu
Stefano Pisati
stefano at stefanopisati.net
Tue Mar 1 10:18:32 CET 2016
Hi Albert, thank for the reply, funny thing is that it has worked well for 2 weeks and now stopped, I'm using a Fritzbox so I can't change too much, will re-check the config this night at home.
Best regards
Stefano Pisati
Il giorno 1-mar-2016, alle ore 09:50, Albert López <alopez at ac.upc.edu<mailto:alopez at ac.upc.edu>> ha scritto:
Hello,
The problem is that you have configured your client as an xTR when it should be a mobile node.
You should change the parameter operating-mode of the configuration file from xTR to MN. The xTR is used when the device is working as a router with other clients connected to it.
On the other hand, I see that the RLOC of the device is a private address while the address of the Map Server is a public address. Notice that current implementation of OOR doesn't support NAT.
Best regards
Albert
On 28/02/16 03:03, vtec support wrote:
hi
i am trying to configure OOR on ubuntu 14.04 LTS
server side
oor.conf
debug = 3
map-request-retries = 2
log-file = /var/log/oor.log
operating-mode = MS
control-iface = eth0
lisp-site {
eid-prefix = 1.1.1.1/32
key-type = 1
key = test123
# iid = 0
accept-more-specifics = true
}
==========================================================================================
2016/2/28 2:56:16] INFO: Open Overlay Router v1.0 compiled for Linux
[2016/2/28 2:56:16] WARNING: Rights: Effective [4294967295] Permitted [4294967295]
[2016/2/28 2:56:16] INFO: Building address to interface hash table
[2016/2/28 2:56:16] INFO: Control created!
[2016/2/28 2:56:16] INFO: Log level: High Debug
[2016/2/28 2:56:16] DEBUG-3: Creating mdb...
[2016/2/28 2:56:16] DEBUG-3: Creating mdb...
[2016/2/28 2:56:16] DEBUG: Finished Constructing Map-Server
[2016/2/28 2:56:16] INFO: Device working in mode Map Server registering with control
[2016/2/28 2:56:16] DEBUG-2: Adding interface eth0 with index 2 to iface list
[2016/2/28 2:56:16] DEBUG-2: Interface eth0 with index 2 added to interfaces lists
[2016/2/28 2:56:16] DEBUG-3: open_ip_raw_socket: open socket 5 with afi: 2
[2016/2/28 2:56:16] DEBUG: bind_socket: Binded socket 5 to source address 16.9.8.13 and port 0
[2016/2/28 2:56:16] DEBUG: add_rule: Add rule -> Send packets with source address 16.9.8.13 and destination address _NULL_ to the table 2 with priority 2.
[2016/2/28 2:56:16] DEBUG-3: open_ip_raw_socket: open socket 6 with afi: 10
[2016/2/28 2:56:16] DEBUG: bind_socket: Binded socket 6 to source address 2a01:4f8:151:208a::2 and port 0
[2016/2/28 2:56:16] DEBUG: add_rule: Add rule -> Send packets with source address 2a01:4f8:151:208a::2 and destination address _NULL_ to the table 2 with priority 2.
[2016/2/28 2:56:16] DEBUG: Adding lisp site prefix 1.1.1.1/32 to the lisp-sites database
[2016/2/28 2:56:16] DEBUG-3: _add_ippref_entry: Added map cache data for 1.1.1.1/32
[2016/2/28 2:56:16] DEBUG-3: mdb_add_entry: inserted 1.1.1.1/32
[2016/2/28 2:56:16] DEBUG-3: open_udp_datagram_socket: Created socket 7 associated to IPv4 addresses
[2016/2/28 2:56:16] DEBUG: bind_socket: Binded socket 7 to source address _NULL_ and port 4342
[2016/2/28 2:56:16] DEBUG-3: open_udp_datagram_socket: Created socket 8 associated to IPv6 addresses
[2016/2/28 2:56:16] DEBUG: bind_socket: Binded socket 8 to source address _NULL_ and port 4342
[2016/2/28 2:56:16] DEBUG-2: Default IPv4 control iface eth0: 16.9.8.13
[2016/2/28 2:56:16] DEBUG-2: Default IPv6 control iface eth0: 2a01:4f8:151:208a::2
[2016/2/28 2:56:16] DEBUG: Control initialized
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG: tun_update_route: Process new gateway associated to the interface eth0: 16.9.8.12
[2016/2/28 2:56:16] DEBUG: add_route: added route to the system: src addr: -, dst prefix:-, gw: 16.9.8.12, table: 2
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: tun_update_route: the extractet address from the netlink messages is a local link address: fe80::1 discarded
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message
[2016/2/28 2:56:16] DEBUG: ****** Summary of the configuration ******
[2016/2/28 2:56:16] DEBUG: ****************** MS configured prefixes **************
[2016/2/28 2:56:16] DEBUG: Prefix: 1.1.1.1/32, accept specifics: on merge: off, proxy: off
[2016/2/28 2:56:16] DEBUG: *******************************************************
[2016/2/28 2:56:16] DEBUG: **************** MS registered sites ******************
[2016/2/28 2:56:16] DEBUG: *******************************************************
[2016/2/28 2:56:16] DEBUG: Starting Map-Server ...
[2016/2/28 2:56:16] INFO:
Open Overlay Router (v1.0): started...
[2016/2/28 2:56:16] DEBUG-3: OOR_API: zmq_ctx_new errno: Success
[2016/2/28 2:56:16] DEBUG-3: OOR_API: zmq_socket: Success
[2016/2/28 2:56:16] DEBUG-2: OOR_API: API server initiated using ZMQ
====================================================================================================
no LISP TUN show up on server side
ifconfig
eth0 Link encap:Ethernet HWaddr 14:da:e9:ef:6d:02
inet addr:16.9.8.13 Bcast:16.9.8.159 Mask:255.255.255.224
inet6 addr: 2a01:4f8:151:208a::2/64 Scope:Global
inet6 addr: fe80::16da:e9ff:feef:6d02/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5893552 errors:0 dropped:20 overruns:0 frame:0
TX packets:2133706 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7390943067 (7.3 GB) TX bytes:530010168 (530.0 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:3584 errors:0 dropped:0 overruns:0 frame:0
TX packets:3584 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:215040 (215.0 KB) TX bytes:215040 (215.0 KB)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 16.9.8.12 0.0.0.0 UG 0 0 0 eth0
16.9.8.13 16.9.8.12 255.255.255.224 UG 0 0 0 eth0
16.9.8.13 0.0.0.0 255.255.255.224 U 0 0 0 ethic
client Ubuntu 14.04 LTS
debug = 3
map-request-retries = 2
log-file = /var/log/oor.log
operating-mode = xTR
rloc-probing {
rloc-probe-interval = 30
rloc-probe-retries = 2
rloc-probe-retries-interval = 5
map-resolver = {
16.9.8.13
}
map-server {
address = 16.9.8.13
key-type = 1
key = test123
proxy-reply = on
database-mapping {
eid-prefix = 1.1.1.1/32
# iid = 0
# rloc-address {
# address = 192.168.8.105
# priority = 1
# weight = 50
# }
rloc-iface{
interface = eth0
ip_version = 4
priority = 1
weight = 100
[2016/2/28 6:49:13] DEBUG: Map-Register -> flags:PirM record-count: 1 nonce 3bbadfa577d2fa3b, EID: 1.1.1.1/32, MS: 16.9.8.13
[2016/2/28 6:49:13] DEBUG: Sent control message IP: 192.168.8.105 -> 16.9.8.13 UDP: 4342 -> 4342
[2016/2/28 6:49:13] DEBUG: Sent Map-Register for mapping 1.1.1.1/32 to 16.9.8.13
[2016/2/28 6:49:13] DEBUG: Received Map-Notify-> flags:ir, record-count: 1, nonce 3BBADFA577D2FA3B, IP: 16.9.8.13 -> 192.168.8.105, UDP: 4342 -> 4342
[2016/2/28 6:49:13] DEBUG: Mapping-record -> ttl: 10 loc-count: 1 action: no-action auth: 1 map-version: 0 eid: 1.1.1.1/32
[2016/2/28 6:49:13] DEBUG: Locator-record -> flags: L=1,p=0,R=1, p/w: 1/100 255/0, addr: 192.168.8.105
[2016/2/28 6:49:13] DEBUG-2: mapping_get_locators_with_afi: List for OOR AFI 1 and afi 2 not yet created
[2016/2/28 6:49:13] DEBUG-2: mapping_add_locator: Added locator 192.168.8.105 to the mapping with EID 1.1.1.1/32.
[2016/2/28 6:49:13] DEBUG: Map-Notify message confirms correct registration of 1.1.1.1/32.Programing next Map-Register in 60 seconds
[2016/2/28 6:49:13] DEBUG-3: xTR: Completed processing of LISP control message
[2016/2/28 6:49:17] DEBUG-3: LMAPI: Data available in API socket
[2016/2/28 6:49:17] DEBUG-3: LMAPI: Bytes read from API socket: -1.
[2016/2/28 6:49:17] ERR: LMAPI: Error while ZMQ receiving: Resource temporarily unavailable
[2016/2/28 6:49:17] ERR: oor_api_loop: Error while trying to retrieve API packet
[2016/2/28 6:49:27] DEBUG-3: LMAPI: Data available in API socket
[2016/2/28 6:49:27] DEBUG-3: LMAPI: Bytes read from API socket: -1.
[2016/2/28 6:49:27] ERR: LMAPI: Error while ZMQ receiving: Resource temporarily unavailable
[2016/2/28 6:49:27] ERR: oor_api_loop: Error while trying to retrieve API packet
eth0 Link encap:Ethernet HWaddr 08:00:27:d2:e3:84
inet addr:192.168.8.105 Bcast:192.168.8.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fed2:e384/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:21720 errors:0 dropped:0 overruns:0 frame:0
TX packets:14449 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16039019 (16.0 MB) TX bytes:2328812 (2.3 MB)
lispTun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP POINTOPOINT RUNNING MTU:1440 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:397 errors:0 dropped:0 overruns:0 frame:0
TX packets:397 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:37532 (37.5 KB) TX bytes:37532 (37.5 KB)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.8.1 0.0.0.0 UG 0 0 0 eth0
192.168.8.0 0.0.0.0 255.255.255.0 U 1 0 0 ethic
NO IP address of LISPTUN0
i don't know what i am doing wrong please help
Thanks
_______________________________________________
Users mailing list
Users at openoverlayrouter.org<mailto:Users at openoverlayrouter.org>
http://mail.openoverlayrouter.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.openoverlayrouter.org/pipermail/users/attachments/20160301/2ca753df/attachment-0001.html>
More information about the Users
mailing list