[OOR-Users] Received control message with type 7. Discarding!

[Albert López]

Dear José Miguel,

First of all, welcome to the OOR community :-).
The message type 7 is an info request message described in the 
lisp-nat-traversal draft 
<https://tools.ietf.org/html/draft-ermagan-lisp-nat-traversal-11> .
Unfortunately we only provide support of NAT Traversal in the xTR/MN 
mode. Our implementation of MS and RTR are pretty basic and doesn't 
support  this feature yet. When we want to use an xTR behind NAT, the 
xTR registers  with a MSs deployed in a Cisco box which are compatible 
with our implementation and using also  a Cisco RTR.
If you nodes are not behind NAT, then you can disable 
nat_traversal_support. With this feature disabled, you can use our 
implementation of MS.
By the way, thank you so much for your pull requests :-)

Best regards

Albert


On 10/02/17 03:26, José Miguel Guzmán wrote:
> Hi
>
> I am trying to make OOR  v1.1.1 work is a simple scenario, but I see 
> than xTR is sending messages with an unsupported type 7, to the MS.
> In Wireshark I confirmed the type is 7, although i don´t see this in 
> RFC6830 <https://tools.ietf.org/html/rfc6830>  this type as one of the 
> supported ones
>
> Locator/ID Separation Protocol
>     0111 .... .... .... .... .... = Type: Info (7)
>     .... 0... .... .... .... .... = R bit (Info-Reply): Not set
>     .... .000 0000 0000 0000 0000 0000 0000 = Reserved bits: 0x00000000
>
> MS log says
>
> [2017/2/10 2:17:23] DEBUG: Received Info Request -> nonce 
> 93971bbd5dddb7b3, IP: 172.31.49.202 -> 172.31.55.142, UDP: 4342 -> 4342
> [2017/2/10 2:17:23] DEBUG-3: Map-Server: Received control message with 
> type 7. Discarding!
> [2017/2/10 2:17:23] DEBUG: Map-Server: Failed to process  control message
>
> Any idea about what I am doing wrong?
> I would appreciate any guidance about this.
>
> Bellow a summary of both configurations:
>
> *OOR running as xTR*
> operating-mode         = xTR
> control-iface = eth0
> encapsulation          = LISP
> rloc-probing {
>     rloc-probe-interval   = 30
>     rloc-probe-retries  = 2
>     rloc-probe-retries-interval   = 5
> }
> map-resolver        = {
> 172.31.55.142
> }
> static-map-cache {
>     eid-prefix          = 192.168.1.0/24 <http://192.168.1.0/24>
>     iid                 = 13784
>     rloc-address {
>         address         = 172.31.85.142
>         priority        = 0
>         weight          = 0
>     }
> }
> nat_traversal_support  = on
> map-server {
>         address        = 172.31.55.142
>         key-type       = 1
>         key            = yunque
>         proxy-reply    = on
> }
> database-mapping {
>     eid-prefix          = 172.31.64.0/24 <http://172.31.64.0/24>
>     iid                 = 13785
>     rloc-address {
>         #address         = 34.194.45.229
>         address         = 172.31.49.202
>         priority        = 0
>         weight          = 0
>     }
> }
> proxy-itrs = {
> ...
> }
>
> *OOR running as xTR*
> operating-mode         = MS
> control-iface = eth0
> lisp-site {
>     eid-prefix            = 192.168.1.0/24 <http://192.168.1.0/24>
>     key-type              = 1
>     key                   = yunque
>     iid                   = 13784
>     accept-more-specifics = true
> }
> lisp-site {
>     eid-prefix            = 172.31.64.0/24 <http://172.31.64.0/24>
>     key-type              = 1
>     key                   = yunque
>     iid                   = 13785
>     accept-more-specifics = true
> }
>
>
>
>
> -- 
>
> 	*José Miguel Guzmán
> *Senior Network Consultant
> Latin America & Caribbean
>
> 		+1 (650) 248-2490 <tel:+16502482490>
> +56 (9) 9064-2780 <tel:+56990642780>
>
> 		jmguzman at whitestack.com <mailto:jmguzman at whitestack.com>
>
> 		jmguzmanc
>
>
>
> _______________________________________________
> Users mailing list
> Users at openoverlayrouter.org
> http://mail.openoverlayrouter.org/cgi-bin/mailman/listinfo/users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.openoverlayrouter.org/pipermail/users/attachments/20170210/d239a225/attachment-0001.html>