[OOR-Users] lispTun0 going nowhere...

[Albert López]

Hi José Miguel,

Could you send us your configuration files and log files? Also it will 
be interesting to see ifconfig, ip route, ip rule, ip route show table #.
By the way, do you have configured a gateway for your rloc interface?

Best regards

Albert



On 10/02/17 09:20, José Miguel Guzmán wrote:
> Hi
>
> I am very close to make OOR work in Ubuntu... but probably I need some 
> little help :)
>
> I have 4 xTR nodes R{1..4}, with LAN{1..4} as EIDs and interconnected 
> among them with WAN{1..4} as RLOCs
>
> If I try to ping LAN4 from LAN1, I see packets being received by 
> lispTun0, but they don´t go anywhere :(
> So, from R1, I am doing
> *ping -I 172.31.64.250 172.31.67.250
> *
>
> after what I see the packets in the tunnel:
> *tcpdump -ilispTun0 -n -nn*
> 07:54:50.104742 ip: 172.31.64.250 > 172.31.67.250 
> <http://172.31.67.250>: ICMP echo request, id 12847, seq 222, length 64
> 07:54:51.104745 ip: 172.31.64.250 > 172.31.67.250 
> <http://172.31.67.250>: ICMP echo request, id 12847, seq 223, length 64
> 07:54:52.104721 ip: 172.31.64.250 > 172.31.67.250 
> <http://172.31.67.250>: ICMP echo request, id 12847, seq 224, length 64
> 07:54:53.104761 ip: 172.31.64.250 > 172.31.67.250 
> <http://172.31.67.250>: ICMP echo request, id 12847, seq 225, length 64
> 07:54:54.104746 ip: 172.31.64.250 > 172.31.67.250 
> <http://172.31.67.250>: ICMP echo request, id 12847, seq 226, length 64
> 07:54:55.104748 ip: 172.31.64.250 > 172.31.67.250 
> <http://172.31.67.250>: ICMP echo request, id 12847, seq 227, length 64
>
> This is how lispTun0 looks like
>
> lispTun0  Link encap:UNSPEC  HWaddr 
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>           UP POINTOPOINT RUNNING  MTU:1440  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:350 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:500
>           RX bytes:0 (0.0 B)  TX bytes:29400 (29.4 KB)
>
> I wonder how lispTun0 connects to the other routers?
> In some tunneling examples, I see the PtP information in ifconfig..
>           inet addr:10.0.0.1  P-t-P:10.0.0.2  Mask:255.255.255.252
>
> but here, I don´t see those parameters
> ip tunnel show doesnt return anything
>
> What am I missing?
>
> Thanks! I love the project!!
>
> JM
>
> -- 
>
> 	*José Miguel Guzmán
> *Senior Network Consultant
> Latin America & Caribbean
>
> 		+1 (650) 248-2490 <tel:+16502482490>
> +56 (9) 9064-2780 <tel:+56990642780>
>
> 		jmguzman at whitestack.com <mailto:jmguzman at whitestack.com>
>
> 		jmguzmanc
>
>
>
> _______________________________________________
> Users mailing list
> Users at openoverlayrouter.org
> http://mail.openoverlayrouter.org/cgi-bin/mailman/listinfo/users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.openoverlayrouter.org/pipermail/users/attachments/20170210/d2762207/attachment.html>