[OOR-Users] Fwd: Re: [OOR maintainers] LISP Beta network allocation

Mon Nov 20 11:14:11 CET 2017

Dear Gunnar,

Unfortunately this mailing list is related to an implementation of LISP 
for Linux, OpenWRT and Android called OpenOverlayRouter. I don't know if 
any member of the list have experience with FritzBox, which is not my 
case :-P, if there is any one who can help you is more than welcome !!
Have you double checked the password I sent to you? When you tell us 
about LISP status page, do you refers to a page of the router 
configuration or do you refers to the page of lisp4.net? This last one 
is updated every couple of hours so you need to be connected during this 
period of time to appear as an active site.  Does your router have some 
logs file or similar to check  if there is any specific problem?
Regarding yous ISP, LISP use the UDP ports 4341 and 4342.

Best regards

Albert

El 17/11/17 a les 23:54, Gunnar Arndt ha escrit:
> Dear mail list members,
>
> I very recently joined the beta network and have issues with the LISP 
> config of my router (a FritzBox 6360 cable). I've been discussing this 
> with Albert Lopez and only a few minutes ago got attracted by this 
> mail list. I can only guess how many receipients there are, but allow 
> me to re-post my latest question here:
>
>
> -------- Weitergeleitete Nachricht --------
> Betreff: 	Re: [OOR maintainers] LISP Beta network allocation
> Datum: 	Fri, 17 Nov 2017 22:56:46 +0100
> Von: 	Gunnar Arndt <gunnar at arndt.city>
> An: 	Albert López <alopez at ac.upc.edu>
>
>
>
> Hi Albert,
>
> thanks again for the additional addresses. I get both an IPv4 and an 
> IPv6 address from my provider, which the router reports to my eMail 
> address when they are refreshed. The router allows to select which one 
> is "native". I tested both matching configurations, i.e. "native" 
> dynamic IPv4 with IPv4 LISP settings, and the same for IPv6. I also 
> tested native IPv4 (=Dual Stack, according to the settings) with IPv6 
> LISP.
> None of these worked: the LISP status page indicates garndt-xtr as 
> inactive, and the router uses regular dynamic addresses.
> The following are the settings which I usually use:
>
>
> Don't be scared about the german explanations - I'm sure you're able 
> to get the meaning if necessary.
> Is it possible for my provider to prevent the usage of LISP? They 
> manage firmware updates of the router remotely, so I guess they would 
> have turned of its LISP config page in that case, but who knows? Too 
> bad Unitymedia's customer service has been becoming worse recently...
>
> Kind regards,
> Gunnar
>
> Am 17.11.2017 um 10:02 schrieb Albert López:
>> Dear Gunnar,
>>
>> Your Internet provider gives you an IPv4 or an IPv6 address? You can 
>> check it in any 'what is my ip' page.
>> If your Internet provider is using IPv6, then these are the data to 
>> be used:
>>
>>   * MS/MR: 2001:6C8:130:600::1:1, 2001:40B0:7500:205::9353:8320
>>   * PxTR: 2001:6c8:130:600::1
>>
>> Best regards
>>
>> Albert
>>
>>
>>
>> El 17/11/17 a les 00:12, Gunnar Arndt ha escrit:
>>> Dear Albert and maintainers,
>>>
>>> thank you for the login data. I haven't yet succeeded in actually 
>>> joining the network. There does not seem to a lot that could be 
>>> configured the wrong way in my "FritzBox" router:
>>>
>>> There is another tab that allows a static IPv6 address to be set, 
>>> but if I set the EID prefix for IPv6 there, too, the internet access 
>>> does not work any longer, so I returned to the recommended DHCPv6 
>>> option.
>>> My provider is Unitymedia (formerly KabelBW), a cable TV provider. 
>>> You don't happen to have information if they allow their customers 
>>> to use LISP, do you?
>>> There does not seem to be much information for end users about LISP 
>>> in the web. Can you give me a hint how to proceed? Thanks again.
>>>
>>> Kind regards,
>>> Gunnar
>>>
>>> Am 15.11.2017 um 10:33 schrieb Albert López:
>>>> Dear Gunnar,
>>>>
>>>> Here's your allocation data:
>>>> Device name: garndt-xtr
>>>> Region: Europe
>>>> Geographic location: Germany
>>>> EID-prefix: 153.16.58.0/28 (more specifics allowed)
>>>> EID loopback: 153.16.58.1
>>>> EID-prefix ipv6: 2610:D0:21E8::/48 (more specifics allowed)
>>>> EID loopback ipv6: 2610:D0:21E8::153:16:58:1
>>>> Map Servers: {RIPE} {upc-mr-ms-1 147.83.131.32, tdc-mr-ms 
>>>> 193.162.145.50, intouch-ams-mr-ms-1 217.8.98.42}
>>>> Map Server password: ******
>>>> Map Resolvers: {RIPE} {upc-mr-ms-1 147.83.131.32, tdc-mr-ms 
>>>> 193.162.145.50, intouch-ams-mr-ms-1 217.8.98.42}
>>>> PETR: 193.162.145.46, 217.8.98.33
>>>> Contact: Gunnar Arndt <gunnar at arndt.city>
>>>> Expiration date: 31/03/2018
>>>>
>>>> You can check if you correctly registered your site into the 
>>>> mapping system on the LISP Site Status page here: 
>>>> http://www.lisp4.net/lisp-site/ After one day it will probably show 
>>>> up on the LISPmon website as well: http://lispmon.net
>>>>
>>>> You can slice up your prefixes into more specifics and distribute 
>>>> them between more than one device if that becomes necessary, just 
>>>> make sure they don’t overlap.
>>>>
>>>> The assigned EIDs will expire the 31st of March of 2018. You can 
>>>> request to renew them by mail.
>>
>
>
>
> _______________________________________________
> Users mailing list
> Users at mail.openoverlayrouter.org
> https://mail.openoverlayrouter.org/cgi-bin/mailman/listinfo/users

-- 
Albert López
CCABA System Administrator
Universitat Politècnica de Catalunya
Telf: 93 4017182

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.openoverlayrouter.org/pipermail/users/attachments/20171120/28bace91/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ajoonjbfkpnnjgmi.png
Type: image/png
Size: 124676 bytes
Desc: not available
URL: <http://mail.openoverlayrouter.org/pipermail/users/attachments/20171120/28bace91/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nhlflkkkkdoabjkn.png
Type: image/png
Size: 25693 bytes
Desc: not available
URL: <http://mail.openoverlayrouter.org/pipermail/users/attachments/20171120/28bace91/attachment-0003.png>