[OOR-Users] Question OOR with Archer C2600

[Günther J. Niederwimmer]

Hello Albert,

thanks for your work and help, 

now I like to test this with my router ;-), but I mean I buy a WRT1200AC  for 
better understanding this Problem?

In the Moment I have the snapshot version for the C2600 1.1 with the "stable" 
Version I have only Problems (no network or crash or .....)

I found only some DOC's for LISP by cisco but near nothing about LISP from 
openWRT / LEDE and then, the way was long to found the OOR Project!

OK, now I like to test this afterward I like to have a multihoming System ;-).

Thanks again for the help,

Am Mittwoch, 25. April 2018, 10:41:08 CEST schrieb Albert López:
> Dear Günther,
> 
> I compiled a version of OOR for your device model. To install it, you
> should ssh to your device. Once you are inside:
> 
>   * cd /tmp
>   * wget
>    
> http://www.openoverlayrouter.org/downloads/OpenWrt/1.2.1/oor_1.2.1-5_ipq806
> x.ipk * opkg update
>   * opkg install oor_1.2.1-5_ipq806x.ipk
> 
> At this moment you have installed OOR in your device. The current
> version of OOR doesn't have graphical interface to configure OOR from
> the configuration web page. You should use this configuration file.
> You can find the configuration file in /etc/config/oor.conf.
> To start stop OOR as daemon : /etc/init.d/oor start|stop|restart.
> If you want to start OOR showing the log in the terminal, just call oor.
> If you need multihoming, you will have to configure previously one of
> the ports of the LAN switch as a WAN port. To do that, we use VLANs but
> this is not configured by OOR. We have a precompiled version of OOR to
> easily use multihoming but it is only available for the Linksys
> WRT1200AC <https://github.com/OpenOverlayRouter/oor/wiki/Easy-Multihoming>.
> I also attach a script as an example to configure the OpenWRT firewall
> in order to open the ports used by LISP.
> 
> I hope this will help you to do your first steps with LISP and OOR :)
> 
> Let me know if  you need anything else.
> 
> Best regards
> 
> Albert
> 
> On 24/04/18 14:25, Günther J. Niederwimmer wrote:
> > Hello,
> > 
> > I like to test OOR with my Archer C2600, is this possible ?
> > 
> > I found only a package for the Linksys WRT1200AC and a "old" "LISP"
> > Package
> > for the C2600 but nothing with OOR?
> > 
> > What is the way to install and Test this??
> > 
> > Thanks for a answer


-- 
mit freundlichen Grüßen / best regards,

  Günther J. Niederwimmer