[OOR-Users] Uses of OOVR in Linux

[yosvany]

Thanks for write me, and answer my questions. I like very much the LISP
Technology for the cloud and NFV. I update  my VPP 18.10 with the  code and
work, the VPP send LISP Register  to my OOR MR/MS.

 

But i get this logs, look the Warnings from my VPP as XTR to OOR Server

 

[2019/1/21 14:34:2] DEBUG: Received Map-Register -> flags:pirM record-count:
1 nonce f39c4918b357daaf, IP: 192.168.74.4 -> 192.168.74.60, UDP: 4342 ->
4342

[2019/1/21 14:34:2] DEBUG:   Mapping-record -> ttl: 86400 loc-count: 1
action: no-action auth: 0 map-version: 0 eid: (IID 10/0, EID fd00:102::/48)

[2019/1/21 14:34:2] DEBUG:     Locator-record -> flags: L=1,p=0,R=0, p/w:
1/100 0/0, addr: 192.168.74.4

[2019/1/21 14:34:2] WARNING: ms_recv_map_register: Received a none
authoritative record in a Map Register: (IID 10/0, EID fd00:102::/48)

[2019/1/21 14:34:2] DEBUG: Map-Notify-> flags:ir, record-count: 1, nonce
f39c4918b357daaf, IP: 192.168.74.60 -> 192.168.74.4, UDP: 4342 -> 4342

[2019/1/21 14:34:2] DEBUG: Sent control message IP: 192.168.74.60 ->
192.168.74.4 UDP: 4342 -> 4342

 

This is another router as XTR to the OOR Server. Working fine.

 

 

[2019/1/21 14:34:9] DEBUG: Received Map-Register -> flags:pIrM record-count:
1 nonce 38db90ae39ab141a, IP: 192.168.76.60 -> 192.168.74.60, UDP: 4342 ->
4342

[2019/1/21 14:34:9] DEBUG:   Mapping-record -> ttl: 1440 loc-count: 1
action: no-action auth: 1 map-version: 0 eid: (IID 10/32, EID
fd00:0:76::/48)

[2019/1/21 14:34:9] DEBUG:     Locator-record -> flags: L=1,p=0,R=1, p/w:
1/100 1/100, addr: 192.168.76.60

[2019/1/21 14:34:9] DEBUG:   xTR_ID: edede3fd48f81623a76ba7383477f74e

[2019/1/21 14:34:9] DEBUG: Map-Notify-> flags:Ir, record-count: 1, nonce
38db90ae39ab141a, IP: 192.168.74.60 -> 192.168.76.60, UDP: 4342 -> 4342

[2019/1/21 14:34:9] DEBUG: Sent control message IP: 192.168.74.60 ->
192.168.76.60 UDP: 4342 -> 4342

[2019/1/21 14:34:4

 

 

Could you tell me how i can fix this problem???

 

 

Best Regards for you. Yo

 

 

De: Albert López [mailto:alopez at ac.upc.edu] 
Enviado el: martes, 15 de enero de 2019 13:18
Para: yosvany <yosvanyrf at nauta.cu>; users at openoverlayrouter.org
Asunto: Re: [OOR-Users] Uses of OOVR in Linux

 

Dear Yosvany,

 

OOR doesn't allow you two separate EID prefixes with different IID from the
same xTR. May be this could be done previously to run OOR using network
namespaces? I am not sure.  May be other users know if it is possible to do
some hack previously to start OOR to solve this.

 

Best regards

 

Albert

 

 

On 12/1/19 13:28, yosvany wrote:

Dears OOVR Team:

 

Actually i use OOVR in Linux 16.04 with 3 interface, 1 WAN and 2 LAN every
LAN interface has your Instansce ID. I would like to separate the routing
bettwen this two LAN interfaces if the OOVR dont find in the map server
EID/RLOC answer.

 

 

How i can do this???

 

 

Best Regards for the OOVR Team.





_______________________________________________
Users mailing list
Users at mail.openoverlayrouter.org <mailto:Users at mail.openoverlayrouter.org> 
https://mail.openoverlayrouter.org/cgi-bin/mailman/listinfo/users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.openoverlayrouter.org/pipermail/users/attachments/20190121/c1a73f7b/attachment.html>